hardware    software    service    support   contact us    what's new

 

LD9000 Series Pole Display


The LD9000 is a two line twenty character pole display that solve the classic "I wish I had an extra I/O port" problem, by using our data pass-through data capabilities. Logic Controls' data pass-through process allows connection of multiple pole displays, cash drawers, printers and other devices to a single output port. In the pass through mode, a pole display monitors the incoming data, then decides to display the data or pass it to the next down-stream device. Bright blue / green vacuum fluorescent characters are enhanced with an optical filter for better contrast and easier viewing. All standard displays support moving sign advertisements during periods of inactivity with a single message download, eliminating constant application software refreshing. 

 

Features : 

  • Bright, high contrast vacuum fluorescent display
  • Large 9.5mm character height
  • 20 characters x 2 rows
  • Various command sets and OPOS support available
  • Each side displays the same or different messages
  • Optional height, horizontal offset, rotation, and tilt
  • User definable graphic characters and symbols
  • Automatic message scrolling to the left or right
  • Real time clock display
  • Intelligent pass-thru to share PC I/O ports with other peripheral devices
  • High communication rate at 19.2K bps for fast data through-put
  • Wide interface selection: serial, parallel, USB, and pass-thru
  • Ergonomic design
Model
Description
LD9000 :
Pole Display, 9.5mm Blue-Green Vacuum Fluorescent, 2x2characters, RS232 Interface, DB9F Connector, Logic Controls command set, Mounting Plate, 120VAC Power Adapter.
LD9xx1 :
 Any Display Listed w/ 220 VAC Instead of 120 VAC Adapter
LD9000U :
 LD9000 with USB Interface
LD9000UP :
 LD9000 with USB Interface, Port-powered
LD9090 :
 LD9000 with Parallel Interface DB25M connector
LD9100-PT :
 LD9000 with Serial Pass-Thru (DB9F/DB25M dual connector)
LD9190-PT :
 LD9100 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LD9200 :
LD9200 with Special Command Set 1 (Aedex)
LD9200U :
 LD9200 with USB Interface
LD9290 :
 LD9200 with Parallel Interface DB25M connector
LD9400 :
 LD9400 with Special Command Set 3 (Epson)
LD9400U :
 LD9400 with USB Interface
LD9490 :
 LD9400 with Parallel Interface DB25M connector
LD9400-PT :
 LD9400 with Serial Pass-Thru (DB9F/DB25M dual connector)
LD9490-PT :
 LD9400 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LD9500 :
 LD9500 with Special Command Set 4 (Ultimate Technology)
LD9500U :
 LD9500 with USB Interface
LD9590 :
 LD9500 with Parallel Interface DB25M connector
LD9590-PT :
 LD9500 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LD9900 :
LD9900 with OPOS Command Set
LD9900U :
 LD9900 with USB Interface
LD9990 :
 LD9900 with Parallel Interface DB25M connector
LD9900-PT :
 LD9900 with Serial Pass-Thru (DB9F/DB25M dual connector)
LD9990-PT :
LD9900 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LD9xxx-25 :
 For Serial Pole Displays without Pass-Thru w/ DB25F
Connector instead of DB9F Connector

Specifications are subject to change without prior notice.