hardware    software    service    support   contact us    what's new




 

 

LT9000 Series Desktop Display

The LT9000 Table Display provides an alternative to the traditional pole display. Mounting directly on the counter is ideal when standard pole displays cannot be used. 

 

Features : 

  • Bright, high contrast vacuum fluorescent display
  • Large 9.5mm character height
  • 20 characters x 2 rows
  • Various command sets and OPOS support available
  • Each side displays the same or different messages
  • Optional height, horizontal offset, rotation, and tilt
  • User definable graphic characters and symbols
  • Automatic message scrolling to the left or right
  • Real time clock display
  • Intelligent pass-thru to share PC I/O ports with other peripheral devices
  • High communication rate at 19.2K bps for fast data through-put
  • Wide interface selection: serial, parallel, USB, and pass-thru
  • Ergonomic design

 

Model
Description
LT9000 :
 Pole Display, 9.5mm Blue-Green Vacuum Fluorescent, 2x20characters, RS232 Interface, DB9F Connector, Logic Controls command set, Mounting Plate, 120VAC Power Adapter.
LT9xx1 :
 Any Display Listed w/ 220 VAC Instead of 120 VAC Adapter
LT9000U :
 LT9000 with USB Interface
LT9000UP :
 LT9000 with USB Interface, Port-powered
LT9090 :
 LT9000 with Parallel Interface DB25M connector
LT9100-PT :
 LT9100 with Serial Pass-Thru (DB9F/DB25M dual connector)
LT9190-PT :
 LT9100 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LT9200 :
 LT9200 with Special Command Set 1 (Aedex)
LT9200U :
 LT9200 with USB Interface
LT9290 :
 LT9200 with Parallel Interface DB25M connector
LT9400 :
 LT9400 with Special Command Set 3 (Epson)
LT9400U :
 LT9400 with USB Interface
LT9490 :
 LT9400 with Parallel Interface DB25M connector
LT9400-PT :
 LT9400 with Serial Pass-Thru (DB9F/DB25M dual connector)
LT9490-PT :
 LT9400 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LT9500 :
 LT95000 with Special Command Set 4 (Ultimate Technology)
LT9500U :
 LT9500 with USB Interface
LT9590 :
 LT9500 with Parallel Interface DB25M connector
LT9590-PT :
 LT9500 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LT9900 :
 LT9900 with OPOS Command Set
LT9900U :
 LT9900 with USB Interface
LT9990 :
 LT9900 with Parallel Interface DB25M connector
LT9900-PT :
 LT9900 with Serial Pass-Thru (DB9F/DB25M dual connector)
LT9990-PT :
 LT9900 with Parallel Pass-Thru (DB25F/DB25M dual connector)
LT9xxx-25 :
 For Serial Pole Displays without Pass-Thru w/ DB25F Connector instead of DB9F Connector

** Specifications subject to change without prior notice.